Product Overview
Technical Data
Sales Brochure
Panel Systems Tile Effect Sheets Structural Trays Flat-to-pitch Associated Products

Vent 3 - Breathable Membrane

Breathable underlay for cold and warm roof applications in non-ventilated picthed roof systems.

Vent3 is a triple layer fabric, high performance breather membrane made
from high tensile spun bonded polypropylene layers, around a micro-porous polypropylene film. Designed for used in a fully supported or unsupported tiled, slated or metal roof system. Superior moisture vapour permeability is achieved whilst maintaining the highest levels of water resistance. Vent3 has a printed dark blue upper surface and white under-face.

The higher vapour permeability and waterproof nature of the membrane,
combined with excellent tensile/tear strength, make Vent3 an ideal product for use in both warm and cold roof applications. Vent3 is equally suitable whether draped unsupported over rafters or laid directly over insulation. It will allow the escape of eater vapour from within the roof structure whilst protecting against wind driven rain, snow and dust which may penetrate the main roof waterproofing, providing a permanent quality breather underlay, which will last the life of the roof construction.

Benefits:

  • Three Layer Membrane
  • Clean and easy to use
  • Lightweight and flexible
  • Excellent tensile and tear strength
  • Waterproof Membrane
  • Long Term Durability
  • UV Stable (4 months exposure)
  • Warm and Cold Roof Applications
  • No additional ventilation required